Tutorial

From Fpga4u

Revision as of 16:11, 1 October 2012 by Xjimenez (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This tutorial will give you an introduction to the tools and guide you through the design of very simple gate-level circuits to more complex design including processors and peripherals.

  • Simple hardware design
  1. Project creation
  2. Create a block diagram (beginner) or Create a VHDL file (intermediate)
  3. Simulation in ModelSim
  4. Pin assignment
  5. Programming the FPGA
  • Designing a full system (TO BE UPDATED)
  1. SOPC Builder
  2. Quartus II project
  3. Nios II project
  4. Adding more elements
Personal tools